The full Materials 2025 scientific program across 3 days — keynotes, oral presentations, and posters. Talks are ordered by program prominence within each day.
Day 1
- Keynote · In-Person
Application of metal single-site zeolite catalysts in heterogeneous catalysis
Stanislaw Dzwigaj · Sorbonne University, France
The metal ions well dispersed at zeolite framework are considered to be active sites of catalytic processes. Therefore, the incorporation of these metals into zeolites as isolated tetrahedral sites appears to be the…
- Keynote · In-Person
How the impact of scarce/critical materials can influence the energy transition
Antonio Iliceto · ETIP SNET, Italy
The transition to sustainable energy sources is crucial for addressing climate change and reducing our reliance on fossil fuels; the CO2 footprint reduction requires the development and deployment of new materials that…
- Oral · In-Person
Deformation and fracture behavior of Ag-based metal-matrix composites
Pavel Lejcek · Institute of Physics of the Czech Academy of Sciences, Czech Republic
As metal-matrix composites (MMCs), the materials are usually considered, containing soft matrix and hard particulates of various shapes. Accordingly, they can well serve for numerous practical applications. From the…
- Oral · In-Person
Dynamic analysis of lithium ion transfer at electrode/solid electrolyte interfaces in all solid state lithium ion batteries under charging condition using ERD technique
Bun Tsuchiya · Meijo University, Japan
An oxide-based solid-state rechargeable lithium ion (Li + ) battery is one of the most remarkable next generation devices. To realize the product, it is essential that we have information on the Li + ion transfer…
- Oral · In-Person
Biomass-enhanced lightweight concrete for sustainable construction - advancing towards carbon neutrality in the built environment
Amra Meskovic · University of Stuttgart, Germany
Concrete technology faces a significant sustainability challenge in reducing its high carbon emissions, as over 8% of global carbon production comes from cement manufacturing. The study reported here aims to provide an…
- Oral · In-Person
The application and impact of aerogels in mineralized foams
Tongyu Xu · University of Stuttgart, Germany
As a type of building material, foamed concrete is often used in various situations as a material that simultaneously offers certain load-bearing capabilities and thermal insulation performance. Numerous studies have…
- Oral · In-Person
Effect of agglomeration on the elastic properties of PLA/CNT nanocomposites: Numerical approach
Raoux Nicolas · DRII, IPSA and LaMe, INSA CVL, France
In recent years, there has been a notable increase in interest in nanocomposites with polymer matrices, driven by their potential to enhance material properties with minimal inclusion volumes. This improvement is…
- Oral · In-Person
Impact of nanoparticles on the mechanical properties of natural fiber biocomposites
Antonio Pantano · Università degli Studi di Palermo, Italy
Biocomposites represent a constantly growing area of research, due to their great versatility of application and possible valid sustainable alternative to traditional composites. Although natural fiber- reinforced…
- Oral · In-Person
Improvement of thermoelectric nanocomposite film through the inclusion of carbon nanofibers and graphene
Khairul Fadzli Samat · Universiti Teknikal Malaysia Melaka, Malaysia
Thermoelectric materials provide a particularly promising solution for converting waste heat into electricity. Bismuth telluride (Bi2Te3) is a widespread type of thermoelectric material due to its high performance at…
- Poster · In-Person
Charging/discharging rates dependences of Li+ Ion migration in all solid state Li+ Ion batteries
Bun Tsuchiya · Meijo University, Japan
All-solid-state lithium (Li)-based batteries (ASSB) have been expected as next generation rechargeable batteries. The existing interfaces between positive and negative electrodes/solid electrolyte (SE) have the highest…
- Poster · In-Person
From core-shell to composites: Exploring microstructure development in metastable Ag–Cu metal matrix composites prepared by bottom-up way
Angelina Strakosova · Institute of Physics of the Czech Academy of Sciences, Czech Republic
Metal-matrix composites, or MMCs, are an interesting class of materials that exhibit unique mechanical properties due to the reinforcement of metallic matrices with various additives. For decades, researchers have…
Day 2
- Keynote · In-Person
Investigating efficiency and environmental impact of type 4 hydrogen tank for heavy mobility
David Chapelle · Université Marie et Louis Pasteur, CNRS, Institut FEMTO-ST, France
The presentation attempts to establish the state of progress of HYperStock project, as a brick of the huge PEPR decarbonized H2 french program. The project aims at consolidating the French scientific leadership in the…
- Keynote · In-Person
Strain localization in austenitic stainless steels studied by atom force microscope
Ghiath Monnet · EDF R&D, France
Almost all metallic alloys deform through nucleation and propagation of slip bands. Slip localization implies that macroscopic deformation is inappropriate in investigating mechanisms of local plastic slip and strain…
- Oral · In-Person
Exploring ionic liquids: A pathway to sustainable energy storage
Juan Jose Parajo Vieito · University of Santiago de Compostela, Spain
The depletion of fossil fuel reserves has reinforced the urgency for alternative energy sources, with a particular emphasis on renewable energy production. Transitioning to renewable energy not only mitigates the…
- Oral · In-Person
Clay soil-sugarcane molasses interactions for use in earthen road construction
Narcisse Malanda · Marien Ngouabi University, Congo
Several interactions take place at the outer surfaces of the soil clay (basal surface and lateral surface) with sugarcane molasses molecules. The organic constituents of molasses occupy the accessible outer surface of…
- Oral · In-Person
Gluability of the thermally modified aspen, birch, and poplar rotary cut veneers with suberinic acids adhesive
Anete Meija · Latvia University of Life Sciences and Technologies, Latvia
The eco-friendly lifestyle has gained significant attention at both individual and industrial levels, leading up to Europe’s “Green Deal.” Progress has been made towards waste-free production methods in the woodworking…
- Oral · In-Person
Metal doped CuS nanoparticles as photothermal therapeutic approach against HeLa cancer cells
Hadir N Abuwarda · Islamic University of Gaza (IUG), Palestine, State of
Background : Cancer is one of the most damaging diseases worldwide and has been responsible for millions of deaths. Conventional cancer therapies, including surgery, chemotherapy and radiotherapy, still have…
- Oral · In-Person
A failure modes and effects analysis approach to ccs risk management
Jehan Mahmood Al Zehhawi · Koya University, Iraq
Fossil fuel combustion's carbon dioxide (CO?) emissions are a primary contributor to climate change, spurring interest in technologies such as Carbon Capture, Utilization, and Storage (CCS). These systems capture CO?…
- Oral · In-Person
A failure modes and effects analysis approach to ccs risk management
Zulfa Jalil Khudadad · Koya University, Iraq
Fossil fuel combustion's carbon dioxide (CO?) emissions are a primary contributor to climate change, spurring interest in technologies such as Carbon Capture, Utilization, and Storage (CCS). These systems capture CO?…
- Oral · In-Person
A failure modes and effects analysis approach to ccs risk management
Aya Bakhtyar Shawkat · Koya University, Iraq
Fossil fuel combustion's carbon dioxide (CO?) emissions are a primary contributor to climate change, spurring interest in technologies such as Carbon Capture, Utilization, and Storage (CCS). These systems capture CO?…
- Oral · In-Person
Fe doped MoS2 nanozymes for sensitive determination of H2O2 in milk
Xin Zhang · Inner Mongolia University of Technology, China
In recent years, due to its unique physical and chemical properties, molybdenum disulfide (MoS2) has been dubbed nanozyme and is widely used in the fields of biomedicine, antibacterial applications, biosensors and so…
- Oral · In-Person
VNQDs anchored in N-doped porous carbon with pseudocapacitive behavior for fast charge and discharge lithium-ion batteries
Zihan Guo · Inner Mongolia University of Technology, China
Vanadium nitride (VN) is an attractive anode material for lithium-ion batteries (LIBs) due to its large theoretical capacity and excellent electrical conductivity; however, its low rate performance and poor cycle life…
- Oral · In-Person
Melamine-derived high-graphite carbon hollow tubular Fe-N/C catalyzed alkaline oxygen reduction reaction
Yanfang Gao · Inner Mongolia University of Technology, China
The Pt/C catalysts used to catalyze ORR are limited by their low reserves, high cost, and poor stability. Melamine is famous for its high nitrogen content and low cost. Herein, melamine, as a nitrogen source, was…
- Oral · In-Person
Synthesis of magnetic cellulose nanocrystals derived from maize waste for the adsorptive removal of lead (Pb) from wastewater samples
Maxwell Thatyana · University of South Africa, South Africa
Over the past few years, heavy metal ions (HMIs) pollution has become a crucial matter by threatening human health and the ecological system, owing to their toxic nature. It has been reported by various researchers that…
Day 3
- Keynote · Virtual
Features of high-voltage consolidation of powder materials
Evgeny Grigoryev · Merzhanov Institute of Structural Macrokinetics and Materials Science Russian Academy of Sciences, Russian Federation
The main features of the method of high-voltage consolidation of powder materials and the resulting advantages and limitations of this method are considered. The short duration of high-temperature exposure in the…
- Keynote · Virtual
Exploring graphene oxide nanocomposites in cancer therapy
Paulo Cesar De Morais · Catholic University of Brasilia, Brazil
In this keynote talk, the use of the Hill model to assess the Benchmark dose (BMD), the lethal dose 50 (LD50), the cooperativity (E) and the dissociation constant (K) while analyzing cell viability data using…
- Keynote · Virtual
Harnessing the unique transport properties of InAs nanowires for single molecule level sensing
Harry Ruda · University of Toronto, Canada
In 1964 Wagner and Ellis presented the first paper on fabrication of micron-scale semiconductor whiskers. Our group was one of the first to apply their ideas in the late 1990’s to realise nanowires with diameters of…
- Oral · Virtual
How hybrid reinforcing of nanocarbons strongly affects the balance between strength and ductility in aluminum matrix composites
Behzad Sadeghi · The Erich Schmid Institute of Materials Science (ESI) of the Austrian Academy of Sciences, Austria
Achieving an optimal balance between strength and ductility in aluminum (Al) matrix composites is vital for advanced structural applications. This study investigates the synergistic effects of carbon nanotubes (CNTs)…
- Oral · Virtual
Fracture behavior and biocompatibility of cellulose nanofiber- composite hydrogels cross-linked with borax
Hiroyuki Takeno · Gunma University, Japan
Polymer hydrogels are soft materials with a large amount of water, whose structure is constructed by a three-dimensional network. In general, polymer hydrogels prepared in traditional manners are generally brittle and…
- Oral · Virtual
Modelling of the multi-component concentration-dependent diffusion
Andrey V Shobukhov · Shenzhen MSU-BIT University (SMBU), China
Diffusion in a dense multi-component mixture needs a special approach for proper mathematical description, because the traditional system of the diffusion equations with the diagonal matrix ignores interaction between…
- Oral · Virtual
Role of d electrons in multifunctional materials
Sujit Kumar Bandyopadhyay · Variable Energy Cyclotron Centre, India
Multifunctional materials are of today’s quest. Miniaturization, i.e. development of these materials in the form of nanomaterials is of primary need considering their application in devices. Moreover, if these are…
- Oral · Virtual
Hybrid discarded tyre rubber and recycled steel fibers composites for enhanced strength and vibration damping for cement concrete railway sleepers
Tanimki Chandra Sekhar Rao · Bapatla Engineering College, India
Conventional concrete sleepers exhibit several drawbacks, such as low impact resistance, poor damping properties, limited toughness, low energy absorption capacity, and high brittleness. These deficiencies make it…
- Oral · Virtual
Applications of our LitAr material for treatment of various diseases
Alexander Valyaev · Russian Academy of Sciences, Russian Federation
Our science grope created LitAr polymer-salt material, Hydroxyapatite containing 80-85%; biopolymer - 15-20% and successfully used it for treatment of different complex diseases such as human bone joints with severe…
- Oral · Virtual
A semi-analytical solution for the dynamic analysis of a rectangular viscoelastic plate subjected to a moving inertial load
Mohammadali Foyouzat · Sharif University of Technology, Iran, Islamic Republic of
A semi-analytical method is developed to determine the response of a thin rectangular plate made of a general viscoelastic material to the excitation of a moving inertial load. The governing equation of the general…
- Oral · Virtual
Enhanced cell-electrode interactions via Poly(3,4-ethylenedioxythiophene)-Polydopamine (PEDOT-PDA) neural interfaces for next-generation BCIs
Shahab Ahmadi Seyedkhani · Sharif University of Technology, Iran, Islamic Republic of
Brain-computer interfaces (BCIs) represent cutting-edge technologies in neuroscience, facilitating direct communication between the brain and external devices. Despite considerable progress, achieving biocompatible…
- Oral · Virtual
Developments in non-destructive testing of ceramic metal matrix composites for aerospace and defence applications
Vuppula Prasanna · Osmania University, India
Ceramic metal matrix composites (CMMCs) are advanced materials integral to aerospace and defence industries due to their exceptional properties, such as high strength-to-weight ratios, thermal stability, wear…
- Oral · Virtual
Tests on ecological electrorheological fluid
Ireneusz Musialek · Jan Kochanowski University, Poland
Currently, due to the increasing automation of machines, "smart materials" are more often used, the properties of which can be changed as a result of external influences. This group of materials includes…
- Oral · Virtual
Improving the corrosion resistance of AISI 304 stainless steel through sol-gel derived MTES/Polysilazane hybrid composite coatings
Parisa Naghadian Moghaddam · Alexander Dubček University of Trenčín in Trenčín, Slovakia
AISI 304 stainless steel, widely used in different industrial applications. However, this metallic substrate suffers from limitations such as low wear resistance and susceptibility to pitting and stress corrosion…
- Oral · Virtual
Development of 3D bioprinted lung airway model to study mucociliary clearance
Kyu Shik Mun · Cedars-Sinai Medical Center, United States
Cystic fibrosis (CF) is a genetic disease caused by mutations in the gene encoding the cystic fibrosis transmembrane conductance regulator (CFTR) protein. CFTR mainly serves as an ion channel enabling chloride and…
- Poster · Virtual
Degradation of selected fibers as a function of maintenance cycles
Magdalena Mlynarczyk · National Research Institute, Poland
With the growing issue of excess used textiles and their environmental impact, it is essential to explore solutions that extend the life cycle of clothing. Understanding how the morphology of different fiber types…
Present your research at Materials 2027
Abstract submissions for the 2027 program are open · March 18–20, 2027 · Village Hotel Changi, Singapore.
Join the Materials 2027 delegation
Singapore · March 18–20, 2027· Hybrid · in-person & virtual
Attend without presenting.